As we all know, water is a precious and expensive commodity. With an increasing number of hosepipe bans and drought orders being enforced each year, the days are gone when paddling pools could be drained and re-filled every few days.

The alternative is to treat the water with PaddleChlor to reduce the need to replace the water and to ensure the safety of children using the paddling pool.

• Ideal treatment for unfiltered paddling pools
• Keeps paddling pool water clean and healthy
• Supplied in convenient tablets which each treat up to 1,000 litres of paddling pool water
• Simply add tablets (quantity varies according to pool size) into your paddling pool water – nothing could be simpler

Top Tip: Warm water speeds up tablet dissolution time.  Pre-dissolve in a little warm water, then pour into the paddling pool water.

The post PaddleChlor Tablets appeared first on hygiene4less.

Formulated specifically for Hot Tub and Spa use and are suitable for use with all chlorine and bromine based sanitisers.

Test Range:

Total Bromine    0 – 10ppm

Free Chlorine     0 – 10ppm

pH                        6.2 – 8.4

Total Alkalinity   0 – 240ppm

ppm = parts per million

The Health and Safety Guideline 282 (HSG282) came into effect in early 2017. The main aim for the introduction was to reduce the risk of Legionella outbreaks associated with spas and hot tubs in commercial settings.

Section 5 of the guideline focuses on water testing and what needs to be tested: Disinfectant, pH and Total Dissolved Solids (TDS).  Levels should be in the following ranges: Chlorine (free): 3 – 5mg/lBromine: 4 – 6mg/lpH: 7.0-7.6TDS: 1500mg/l (or 1000mg/l above the reading of the supply water).

Use Aquasparkle 4 Way Test Strips on our Pool & Spa product range.

The post Aquasparkle 4 Way Test Strips for Pools appeared first on hygiene4less.