ContaminEx is especially formulated to remove surface contamination and radioactive particles. For use in Medical, Laboratory or Industry on Glassware, Rubber, Ceramic, Stainless Steel & Ferrous Metals.

Note: ContaminEx is a highly alkali solution that should not come into contact with polycarbonates and non-ferrous metals such as zinc or aluminium.

• Phosphate Free
• Biodegradable
• Non Flammable
• Fast Rinsing
• Dilutable

TOP TIPS:  Always wear gloves, goggles and a mask.  Use in a ventilated space.  Rinse-ability depends on material to be cleaned, surface conditions and dilution.

The post ContaminEx Decontamination Fluid – 5 Litre appeared first on hygiene4less.

Can be used for the safe removal of felt tip pen, graffiti, aerosol paints and most other forms of oil or solvent based inks and paints.

The post Professional Graffiti Remover Aerosol Spray 400ml appeared first on hygiene4less.

For Referee & Linesman use.  Gives a Temporary Clear White Line that lasts Minutes to prevent Player Encroachment in Soccer or Football Matches & Training Sessions.

• Works in almost all temperatures & weather conditions including RAIN
• Unique Aerosol Valve allows upside down spraying
• No need to have can horizontal
• Alerts officials of player encroachment
• Saves Time by improving play continuity
• Results in Fewer Player Cautions
• Provides Clarity to Officials, Players and Spectators
• Suitable for use on Grass & Artificial Surfaces
• Lightweight & Compact
• Any over spray does not affect leather, fabrics or the environment

Belt Clip Holster available

Discipline Vanishing Spray – clearly better !

The post Vanishing Spray for Referees – 105ml Aerosol appeared first on hygiene4less.

These wipes are strong non-woven wipe (28 x 28 cm) impregnated with a complex surfactant blend that gently lifts the Graffiti from the surface.  No need for hard rubbing. As the graffiti is lifted, wipe away with a clean paper towel before it re-dries.

Have paper towels to hand because the graffiti re-dries very quickly and mopping it up as you go is the fastest most effective cleaning method.

Top Tip: Great for restoring Whiteboards.

INGREDIENT:   N-METHYL PYRROLIDONE  

CAS No: 872-50-4

CONTENT: <30%    RISK: R36/38 Irritating to eyes and skin

Manufactured in the UK

The post Graffiti Wipes – 150 Large Wipes appeared first on hygiene4less.

Ready to use Trigger Spray

This product is engineered for use on Natural Fabrics, Papers & Synthetic Materials that have good absorption characteristics. Performance can be affected by any process performed on the fabric after the material was “loom state”

Man made fibres have less tendency to absorb liquid therefore it is IMPERATIVE to test the fabric to be treated.

A number of factors can adversely affect the ability of Flame Retardant to be absorbed into the fabric or paper and can seriously affect the performance of Flame Retardant:

– If the material been already treated with Water Repellent

– If the material been already treated with Stain Guard or Treatment

– If the fabric was treated with Flame Retardant but has since been exposed to                  environmental conditions such as rain, snow or wind for example

– If it has been exposed to a lot of wear and tear since the last treatment (abrasion, storage etc)

Ensure both sides of the fabric are treated and always test the fabric after treatment and once thoroughly dried.  Complete our “Treatment Certificate” (available on request) and keep it on file.  Once the fabric has been treated – test regularly that the performance has not been impaired over time due to environmental conditions.

Flame Retardant Self Certificate – Sample pdf

The post Fire Proofing Spray – 1 Litre RTU appeared first on hygiene4less.

Applied by Spray, Brush or Dip.

This product was engineered for use on Natural Fabrics, Papers & Synthetic Materials that have good absorption characteristics.  Performance can be affected by any process performed on the fabric after the material was “loom state”.

Man made fibres have less tendency to absorb liquid therefore it is IMPERATIVE to test the fabric to be treated.

A number of factors can adversely affect the ability of Flame Retardant to be absorbed into the fabric or paper and can seriously affect the performance of Flame Retardant:

– If the material been already treated with Water Repellent

– If the material been already treated with Stain Guard or Treatment

– If the fabric was treated with Flame Retardant but has since been exposed
to environmental conditions such as rain, snow or wind for example

– If it has been exposed to a lot of wear and tear since the last treatment
(abrasion, storage etc.)

Ensure both sides of the fabric are treated and always test the fabric after treatment and once thoroughly dried.  Complete our “Treatment Certificate” (available on request) and keep it on file.  Once fabric has been treated – test regularly that the performance has not been impaired over time due to environmental conditions.

Flame Retardant Self Certificate – Sample pdf

The post Flame Retardant Liquid – 5 Litre appeared first on hygiene4less.