Halo Coffee Machine Cleaning Powder – 500g Shaker Pack

For Tea and Coffee Machines:

1. Fit the blanking plate to the grouphead or brewing
   chamber
2. Add 20g of powder (4 heaped teaspons)
3. Set machine to hot water cycle mode (up to 98°C)
4. Run the backflush cycle for 10 minutes of the machine cycle time
5. Rinse thoroughly with hot water to finish

For Beverage or Vending Machines:

1. Add 5-10g of powder (1 – 2 teaspoons) into empty brewer or chamber
2. Fill with very hot water (not boiling)
3. Leave 1-2 minutes or run hot water vend
4. Rinse thoroughly with water before use

For Parts Soaking:

1. Dilute 10g of powder per 100ml of hot water
2. Soak parts for up to 1-2 minutes and crockery
3. Rinse thoroughly with water after soaking

For De-Tannin Pipes:

1. Plug the pipe end and mix the solution as above
2. Leave for 2 minutes then rinse
3. Repeat actin until the pipes run clear
4. Rinse thoroughly with water after soaking

For Cloths, Tea Towels and Laundry Items:

1. Dilute 50g of powder per 1 litre hot water
2. Soak items for up to 5 minutes prior to washing
3. Always check fabric for suitability prior to soaking