Free Delivery on orders £65+01284 810887 Free Delivery on all orders over £65 + vat - Most despatched same day! *T and C's apply 01284 810 887
Cleaning, Hygiene &
Maintenance Chemicals


Aquasparkle 4 Way Test Strips for Pools

  • Test for free chlorine, bromine, pH and total alkalinity.
  • 50 Strips per Pot
£6.99 ex. Vat | £6.99 inc. Vat



Easy to use, AquaSPArkle 4-Way Chlorine / Bromine Test Strips are formulated specifically for Hot Tub and Spa use and are suitable for use with all chlorine and bromine based sanitisers.

Test Range:

Total Bromine    0 – 10ppm

Free Chlorine    0 – 10ppm

pH    6.2 – 8.4

Total Alkalinity    0 – 240ppm

ppm = parts per million

The Health and Safety Guideline 282 (HSG282) came into effect in early 2017. The main aim for the introduction was to reduce the risk of Legionella outbreaks associated with spas and hot tubs in commercial settings. Section 5 of the guideline focuses on water testing and what needs to be tested: Disinfectant, pH and Total Dissolved Solids (TDS). Levels should be in the following ranges: Chlorine (free): 3 – 5mg/lBromine: 4 – 6mg/lpH: 7.0-7.6TDS: 1500mg/l (or 1000mg/l above the reading of the supply water).

  • Dip a strip into the water and remove immediately.
  • Do not shake excess water from the strip
  • Hold horizontally for 15 seconds and compare the colours on the strip pads with the colour chart on the side of the bottle.

Note:  When sanitising your hot tub with chlorine you should test the water at least twice weekly and adjust the total alkalinity, the pH and the chlorine level.  When sanitising with bromine test at least weekly. This is important because the sanitiser will only work effectively over a small pH range and that pH range must be maintained to keep your hot tub safe to use.

Store in a cool dry place and do not let the strips get damp.



There are no reviews yet.

Be the first to review “Aquasparkle 4 Way Test Strips for Pools”

Your email address will not be published. Required fields are marked *

You may also like…