Stericide Food Surface Disinfectant – SUPER CONCENTRATE – Makes up to 200 Litres or Equivalent to 400 x 500ml trigger sprays
This product, even diluted up to 40:1, will surpass EU EN1276 Biocide Test for surface sanitizers.
High Risk Areas Dilute 10:1
General Sanitizing Dilute 20:1
Low Risk Areas Dilute 40:1
Always mix a fresh solution daily. Clean & remove all visible dirt from surfaces before spraying. Spray on, wipe & leave for min 30 seconds then either allow to air dry, or wipe with clean paper towels.
Comes complete with FREE Dispenser Pump, Dosing & Trigger Spray
Top Tip: When the 5 Litre refill bottle is full, to avoid splashing – PN605 pelican pump to dispense
Please click on the link below to download Safety Data Sheet
DS096 Prosan Stericide Concentrate
Directions – to make the solution:
Use the calibrated Vial provided to dispense as follows:
10:1 Dilution – 50ml Concentrate per 500ml Trigger
20:1 Dilution – 25ml Concentrate per 500ml Trigger
40:1 Dilution – 15ml Concentrate per 500ml Trigger
Pour into Trigger Spray and add cold tap water to 500ml marker.
As with all disinfectant tasks, a 2 stage approach to disinfecting is best:
- Remove all visible dirt first using either the pre-diluted Stericide spray
- Then use Stericide Food Surface Disinfectant by liberally spraying the surface to be cleaned. Use a clean cloth and also spray some liquid onto the cloth. The wipe the area and allow the surface to air dry or if necessary, dry with clean disposable paper towels.
Use on all hard surfaces, even VDUs, Microwaves etc
Re-apply as necessary